GRID: Ôhe basic graph - grid blocks are colored according the data variations,
Select the best sweep direction: According to the field layout, the obstacles on your way and your starting position, 8 sweep directions are offered. Choose the suitable direction you want to investigate the field, before starting the survey. Unlike other systems the user is not limited to search only from right to left. Enter to the EXAMINER computer how many sweep lines and steps per line you estimate are needed to walk the area. The EXAMINER will then prompt you to step or to turn to the next sweep line with voice commands!
2 Data collection modes manual and auto: For uneven ground when a standard pace cannot maintained, select manual mode, then after every step you make or probes you move (depending the mode used), click on “CAPTURE” and see what is found. On flat ground use auto mode, and input to the computer the time (seconds) needed to make a step, click “START”. The computer will give you voice and visual signals when to step, turn or complete the survey. Your ears prompt you to step, turn or stop and your eyes see the results immediately. If you encounter obstacles on your way like trees or rocks you can pause the data collection, pass the obstacle and start it again New "replay" function assures that no target is left behind: A stored image at the EXAMINER hard disk, can be imported back anytime and be viewed using the "replay" function. The user can relax at the comfort of his home and select the "replay" to see the survey step by step again on the EXAMINER screen, the EXAMINER imitates the exact steps, sweep direction and data presentation of the original survey. The "replay" is a unique EXAMINER feature. The screen goes blank and just like a puzzle the image is re appearing. This is not only a "movie" of the original data capture. Use the "replay" and compare investigations from different sweep directions and EXAMINER modes on the same site, to validate your target. Often small but valuable targets lying near big ones are masked and are not visible. The "replay" guarantees that a weak response of either a small or a very deep target will be clearly viewable, then as the "replay" continues and the big target is encountered the small one will fade. It is up to you to investigate again on the suspected target area, leave the big target out of your new survey by selecting another sweep direction and then compare the images.
The EXAMINER makes the full target image analysis and target depth calculation immediately on the field. No need to transfer the data file to a laptop to see images in higher resolution! You do not pay additional money for extra software just for indicating depth.
Specifications Display : Backlight 8.4” TFT LCD SVGA Panel 800 x 600 Resolution
Computer : 1GHz Processor INTEL i586- compatible
Input Device : Resistive Touch Panel
Operating System : Windows XP
BIOS System : Whizpro Bios, APM 1.2
Working Memory : 512MB DDR-RAM
Data Memory : 40GB HDD
Feedback : voice, visual
Dimensions & Weight : 231mm x 192mm x 42mm / 1.19kg (with Battery)
Accessories : Stylus Pen, AC/DC adapter, Power Cord, Protective bag
Safety Certification : EMI FCC / CE / TUV / GOST
Battery : Removable Li-ion Standard Battery Pack Supports up to 4 hours
Charging Time (Battery fully discharged) : ca. 2 Hours
Rubber carry bag and neck straps
3 integrated systems
Other optional antenna systems are under development!
Gradiometer : +/- 50,000 nT
Metal Detector : 25KHz
Manual Mode: Manual capture. Real time data graphics for both modes
Geophysical : 40 m.
Gradiometer : 6 m.
Metal detector : 2 m.